|
PSDN
Water en stof dichte armatuur *)
IP 65
* Met dimbaar EVSA mogelijk
The watertight luminaires of the PSDN series offer
significant advantages such as increased light performance,
ease of installation and maintenance, degree of
protection IP65 and superb design with simple curved lines.
In areas demanding protection against vandalism and
resistance to extreme temperature, the base and the
diffuser are made of polycarbonate (PC) and the
retaining clips of the diffuser and the metal support
components of the luminaire are made of stainless steel.
During the installation and the wiring of the luminaire the diffuser and the reflector Remain suspended
on the luminaire.
The synthetic multilayered film reduces the weight of the reflector and facilitates use while at the same time
the reflector is resistant to mechanical strains without being permanently deformed.
All luminares of PSDN series are supplied with all their support components and rubber gland for
cable installation and removal.
The specular reflector with the parabolic reflective surface is used as standard accessory,
mounted at the best possible distance under the lamp(s) of the luminaire.
The most significant innovation of the PSDN series is offered as a standard accessory.
The reflector made of synthetic film offers increased light performance at least by 25% at the working level
compared to common flat reflectors. Increased concentration of light to the desired area (red curve),
contrary to flat reflectors made of white iron sheet of similar luminaires that simply diffuse light (blue curve)
PSDN IP65 armatuur
Polycarbonate (PC) base and diffuser with high impact and temperature resistance for T5 lamps.
Description
Wall or ceiling luminaires, degree of protection IP65, with additional specular,
parabolic reflector behind each fluorescent lamp for enhanced light performance and energy saving ,
and stainless diffuser retaining components.
Applications
Suitable for ares with ambient temperature up to
55°C. For warehouses, parking lots, industries,
laboratories, areas with special demans for high
impact and high temperature resistance.
Technical data
- Plastic bas made of polycarbonate (PC) with self- extinguishing degree
UL94-V2.
- Two perimetrical channels (one filled with elastic polyurethane) for protection and
sealing against dust and humidity.
- Use of internal durable reflector, coated with pure aluminum 99,9% enhancing light
performance by 25% compared to similar luminaires with white reflector. The material
of the reflector is highly resistant to mechanical strain, corrosion and fingerprints.
- Easy connection-disconnection (wiring) of the luminaire through direct access to the
electrical components with the base mounted at the bottom of the luminaire.
- The luminaires are supplied fully assembled with stainless steel connecting clips for
the base and diffuser. They are supplied fully assembled with the suspension and
support components of the luminaire for fast installation.
- Certified by international electrotechnical laboratories with ENEC mark.
- Protection class I. Degree of protection IP 65. High impact resistance IK 09.
- Electronic ballast and T5 lamp (16mm in diameter). The luminaire is available in
different operating voltages and frequencies.
- Lampholders made of durable polycarbonate.
- The cables inside the luminares are firmly attached to the internal surface of the base.
- Wiring made of highly heat resistant cables (HT 105°C / 0,5mm²).
 |
|
Afmetingen PSDN armaturen
|
|
|
A
|
B
|
C
|
D
|
E
|
|
1 lamp
|
|
|
|
|
|
|
1 X 14/24 W
|
674
|
507
|
116
|
51
|
106
|
|
1 X 28/54 W
|
1284
|
820
|
116
|
51
|
106
|
|
1 X 35/49/80 W
|
1584
|
820
|
116
|
51
|
106
|
|
2 lampen
|
|
|
|
|
|
|
2 X 14/24 W
|
674
|
507
|
176
|
51
|
106
|
|
2 X 28/54 W
|
1284
|
820
|
176
|
51
|
106
|
|
2 X 35/49/80 W
|
1584
|
820
|
176
|
51
|
106
|
|
download PSDN IP65 armatuur als PDF bestand.
|
